Test your own water.
The same two numbers you see on a trust card, ppm and pH, you can measure yourself. Find the right tool, learn what it can and cannot tell you, and check your readings.
Become a community reporter
Labs cannot test every bottle on every shelf. People can help by measuring the water they buy and reporting what they find. Many reports from different people point to the brands that need a lab to take a closer look.
- 1
Get a meter
A TDS pen, a pH pen or a starter kit is enough. Pick one that fits your budget.
- 2
Test properly
Rinse the probe, calibrate a pH meter, and test the bottle two or three times. Note the batch code on the pack.
- 3
Report what you find
Add your ppm and pH, the batch code and a photo. Say what you saw, where and when.
- 4
See the signal
Approved reports are combined on the brand page. When enough different people report the same thing, a partner lab is asked to check.
- Your reading is a clue, not proof. Only a lab test can confirm a problem.
- Our team approves each report. Each signed-in person counts once per brand.
- Reports and readings never change a brand's purity score.
Which tester do I need?
Tick what you want to know about your water. We will point you to the right tool, and say so plainly when no meter can answer it.
Pick one or more on the left to see what we suggest.
Testers and kits
Every product says what it measures, what it is good for, and what it cannot do.
Digital TDS / ppm pen
Reporter-readyA pocket meter you dip in water to read total dissolved solids in ppm.
- Total dissolved solids (ppm)
- Good for
- Checking a bottle's printed ppm, comparing tap and bottled water, and seeing whether a filter is still working.
- Keep in mind
- It cannot see bacteria, lead, pesticides or nitrates. Cheap pens can be off by 10% or more, and readings change with temperature. Rinse the probe between samples.
Digital pH pen
Reporter-readyA pen-style meter that reads acidity on the 0 to 14 pH scale to one or two decimals.
- pH
- Good for
- Checking whether water sits in the usual 6.5 to 8.5 drinking range.
- Keep in mind
- It must be calibrated with buffer solutions every few weeks and the electrode kept wet in storage solution. An uncalibrated pen can be confidently wrong.
TDS, pH and temperature meter
Reporter-readyOne handheld unit that reads ppm, pH and water temperature.
- Total dissolved solids (ppm)
- pH
- Temperature
- Good for
- People who want the numbers on an AquaVerifi trust card from one device.
- Keep in mind
- Electrodes on budget units wear out sooner. The pH side still needs calibrating, and none of it detects germs or heavy metals.
pH test strips
Paper strips that change colour against a printed chart.
- pH (colour match)
- Good for
- A quick, cheap check with nothing to calibrate or charge.
- Keep in mind
- Usually good to about half a pH unit and judged by eye, so close to the 6.5 and 8.5 lines you should confirm with a meter. Keep the tube dry and check the expiry date.
Multi-parameter water test strips
Strips that screen for several things at once, such as chlorine, hardness, alkalinity, nitrate, nitrite and pH.
- Chlorine
- Hardness
- Alkalinity
- Nitrate and nitrite
- pH
- Good for
- A fast first look at tap, borehole or well water.
- Keep in mind
- A screening tool, not lab accuracy. Results depend on timing and light, and they cannot show bacteria or most chemicals.
pH calibration buffer kit
Standard solutions at pH 4.01, 7.00 and 10.01 for calibrating a pH meter.
- Calibrates a pH meter
- Good for
- Anyone who owns a pH pen or a combo meter.
- Keep in mind
- Solutions go off once opened and when contaminated. Use fresh solution each time and note the date you opened it.
Home water-testing starter kit
Reporter-readyA TDS pen with pH strips and a clean sample cup, so you can check ppm and pH at home.
- Total dissolved solids (ppm)
- pH (colour match)
- Good for
- A first purchase for checking the bottled water your household buys.
- Keep in mind
- Covers the two simplest numbers only. For germs, lead or chemicals you need a lab test.
Laboratory water test
A sample tested by a partner lab, including the things a meter cannot see.
- Bacteria
- Metals such as lead and arsenic
- Chemicals and nitrates
- Good for
- Borehole, well or tank water, anything that makes people ill, and settling a doubt for good.
- Keep in mind
- Takes longer and costs more than a meter. Ask the lab how to collect and send the sample.
Got a reading? See what it means.
Type in what your meter shows. We use the same bands as the guide on our home page, and you can compare against the ppm printed on a label.
Enter a ppm or pH reading to see where it falls.
What a home tester cannot tell you
ppm is not a safety score
A TDS meter counts dissolved salts and minerals. Clear, low-ppm water can still carry bacteria, lead or nitrates.
Calibrate and rinse
An uncalibrated pH pen or a dirty TDS probe gives confident, wrong numbers. Follow the maker's calibration steps and rinse between samples.
For germs and chemicals, use a lab
Only a lab can test for bacteria, heavy metals and most chemicals. Our directory lists labs that can help.
General information, not medical or safety advice. A meter or strip tells you about one or two properties of water. It does not tell you the water is safe to drink.
