Drink enough. Drink clean.
How much water your body needs, how to tell if you are getting it, and what to check before you open a bottle or sachet. Try the tools below. They run on your device and nothing you enter is saved.
How many glasses should you drink a day?
There is no single number. It depends on your size, how active you are and how hot it is. Set yours below, then tap a glass each time you drink one.
One glass about every 1 h 35 min while you are awake.
- Your body 76%
- Exercise 14%
- Heat 10%
A glass is 250 ml and a sachet is 500 ml. This is a rough estimate of what to drink, roughly in line with the 2.2 to 3.0 litres from drinks that the US National Academies give for adults. About a fifth of your water comes from food, and tea, soup and fruit all count. It is general information, not medical advice. If you have kidney, heart or liver disease, or take water tablets, ask a doctor how much is right for you.
Are you drinking enough? Check your urine colour.
It is the easiest free test there is. Pick the shade that matches yours, ideally from your first visit of the day or one a few hours after drinking.
Good. You are drinking about the right amount.
- Vitamin B tablets, beetroot, and some medicines change urine colour.
- Completely clear all day can mean you are drinking more than you need.
What to look out for before you drink
Take any bottle or sachet and tick off what you can see. The first three are must-pass: if any is a no, put it back.
Go through the checks for the bottle or sachet in your hand.
These checks catch visible problems only. Clear, good-smelling water can still carry bacteria or chemicals, and only a lab test shows that.
How to read a water label
Every part of a label tells you something. Tap each part of this sample label to see what it means, what a good one shows, and what should make you stop.
Brand and company
Who made the water and how to reach them.
A company name, a town and a phone number or address you could actually call.
No producer named, or only a generic name like "Pure Water" with no contact.
How to read an AquaVerifi trust card
Every brand on AquaVerifi has a card like this. Change the ppm, the pH and how long ago the water was tested, and watch the purity score move. Lower ppm, a pH in range and a recent test all keep the score high.
- ppm 120: higher ppm costs points−3
- pH 7.2: in range, no points lost0
- Tested 30 days ago: recent, no points lost0
- Purity score100 − 3 = 97
A simplified model to show how each thing counts. Real purity scores come from a lab's full report.
- Purity: Meets our approval bar. 85 or more is what we ask of an Approved brand.
- ppm: Excellent. 50 to 300 ppm. Lower is better.
- pH: Ideal drinking range. Inside the usual drinking range of 6.5 to 8.5.
- Test age: Recent. Tested in the last three months.
Verified by an accredited lab in the last 12 months.
Spot a fake or refilled bottle
Counterfeit and refilled water is hard to spot if you do not know where to look. Tap the markers on the drawing, or the list below it, to see the warning signs.
Pick a marker on the drawing to see the warning sign and what a genuine bottle looks like.
None of these signs proves a fake on its own, and a perfect-looking pack can still be filled with poor water. If something looks wrong, do not drink it. Scan the brand to see its real test history.
Simple habits for cleaner water
Small routines that make it easy to drink enough, and to keep the water you drink safe.
Start with a glass
You lose water while you sleep. A glass after waking is an easy first win.
Sip, do not gulp
Small amounts through the day work better than a litre at once. Your kidneys handle about a litre an hour at most.
Drink with meals
Pairing water with meals makes it automatic. Food also gives you about a fifth of your daily water.
Trust thirst and urine colour
Thirst plus pale-straw urine is the simplest guide. You do not need to force down extra litres.
Wash reusable bottles daily
Warm soapy water and a rinse. Let it air dry. Damp bottles grow germs.
Keep water out of the sun
Do not leave bottles or sachets in a hot car or stall in direct sun. Heat helps germs grow.
Wipe sachets before opening
Sachets sit on floors and in buckets. Wipe the corner and tear it with clean hands, not teeth.
Do not refill single-use bottles for weeks
They are hard to clean inside and scratch easily. Use a proper reusable bottle instead.
Boil it for one minute
Bring water to a rolling boil for 1 minute, then let it cool with a lid on. This kills most germs, but not chemicals.
Store treated water covered
Use a clean container with a tight lid and a tap or narrow neck. Do not dip cups into it.
Know where it came from
Water from a labelled, traceable source beats a mystery source. A scan on AquaVerifi shows the lab history.
Cloudy water? Let it settle first
Pour it through a clean cloth, then boil it. If it still smells wrong, do not drink it.
Good to know
More is not always better
Drinking several litres within an hour or two can dilute the salt in your blood, which is dangerous. Sip steadily, and let thirst and pale urine guide you.
Clear does not mean clean
Bacteria, lead, nitrates and pesticides cannot be seen. A low ppm reading also says nothing about safety. That is why we show lab results.
Some people need advice
Babies under six months, people with kidney, heart or liver disease, and people on water tablets should ask a health worker how much to drink.
General information, not medical advice. Intake figures follow the US National Academies of Sciences adequate intakes (2019). The one-minute boil follows WHO household water treatment guidance. The urine colour chart is a rough everyday guide.
Know what is in your bottle
Scan a bottle for its freshness, ppm, pH and lab history, or learn what those numbers mean.
